How to Install Horizontal Blinds Important Note :
In order to prevent mistakes in blinds installation, please take a few minutes to if you have gone through the followings?
1) Check printed instruction included with your product.
2) Make sure that your blinds are for right windows. (The information of room and blinds number are on a label on bubble wrap.)
3) Check for all parts before discard the blinds packaging.
4) Before you install your blinds, please make sure that there is no obstruction.
5) Wear safety glasses when drilling mounting holes
6) The installation end brackets and support bracket (if required) are level and aligned at the same height Therefore, always use the carpenter' s level to ensure level mounting. Inside Mount or Outside Mount.
Tools You Will Needs
1. Carpenter' s Level
2. Measuring Tape
3. Pencil
4. Screwdriver
5. Drill & Bits (1/16"diameter drill bit on wood surface.
3/32" diameter drill bit on one sheet metal surfaces. )
Standard Hardware You Will Receive For Each Blind
a) 1 Left hand end bracket
b) 1 Right hand end bracket
c) 2 Valance Clips
d) 4 Screws
Note : 2 screws provided for each bracket.
The screws are suitable for sheet metal and wood surfaces.
For other surfaces such as brick, concrete, drywall, plaster, drywall, stone,
or tile may need appropriate anchors, plugs, or screws which are not included.
Hardware for Particular Mounting Options
e) Center support bracket (1 bracket for blinds over 48" wide / 2 brackets for blinds over 96" wide)
f) Hold down brackets
g) 3/8" Spacer block
h) Valance return brackets
i) Metal extension brackets (If using the extension brackets, center support
brackets will be provided)
Shopping Cart 
My Account
Home
Products
Measuring
Installation
About us
Testimonials
